SUS 304 Liquid Process Equipment Juice Beverage Mixing / Blending
Tank
Mixing tank describtion:
The beverage preparation tank is widely used in food (milk),
pharmaceutical, daily chemical, beverage, oil, chemical, pigment
and other industries as heating, mixing or sterilization. It is
especially suitable for small and pilot-scale use of units and
research institutions without steam heat source. And can adopt
completely enclosed structure according to the craft need. In the
field of beverage production, the mixing tank can be used for
mixing and heating water, food additives, and other materials. It
is an indispensable part of beverage production.
Structure: the equipment is composed of inner tank, jacket,
insulation layer, outer covering, reducer, stirring propeller,
thermometer, etc.
Inner bladder: made of 304 stainless steel plate with polished
surface.
Middle jacket: made of A3 steel plate or 1Cr18Ni9Ti steel plate,
strengthened spiral device, cold water from bottom to top (no
pressure), to achieve the purpose of rising and cooling.
Temperature preserving group: made of stainless steel plate into
fish scale pattern, insulation layer with polyurethane or glass
wool to maintain the temperature with the outside, to achieve the
effect of heat preservation.
Reducer: cycloid gear planetary reducer, fixed on the bracket in
the beam, reducer gear shaft and stirrer connection, use looper
connection, easy to disassemble and clean.
Thermometer: specification 0℃ ~ 100℃, installed on the beam,
straight extension medium position, so that the liquid material
used in the position can also indicate the temperature, to achieve
sterilization and aging purposes.
Mixing tank features:
| No | Item | Detail |
| 1 | Heating method | The electric heating rod is inserted into the jacket to evenly heat
without cold zone. Heat conduction oil or water is injected into
the jacket as heating medium to generate heat energy to heat the
material in the tank. |
| 2 | Material heating temperature | Heating time of materials: 20min ~ 90min(as required by the
process). |
| 3 | Temperature control | The temperature is measured and controlled (temperature difference
±≤1°C) by connecting the thermocouple measurement temperature with
the temperature controller, and the temperature of the material can
be adjusted. |
| 4 | Tank body | Internal surface mirror polishing, roughness Ra≤0.4μm. |
| 5 | Upper cover | For two fans can open type movable cover, easy to clean, internal
and external surface mirror polishing treatment, roughness Ra≤0.4μm. |
| 6 | Inner tank bottom structure | After spinning and processing into R Angle, there is no dead Angle
with the inner tank body after welding and polishing, and the
direction of the outlet is inclined to 5°, easy to release the net
material without retention. |
Mixing tank parameters:
Blending tank volume: 2000L
Tank body diameter: 1300mm
Blending tank height: 1500mm
Blending motor power; 2.2KW
Rotary speed of blending rod: 36 rotary per minute
Working pressure: ≤0.09Mpa
Working temperature: ＜100℃
Installation and adjustment:
Only when the supporting foot of the equipment is adjusted to the
horizontal line and the speed reducer is vertical can each pipe be
installed. When working, the agitator should be rotated clockwise
without reversal.
Our company's products are divided into a variety of models,
customers can choose the appropriate equipment according to their
own product output, also can be customized according to customer
requirements
Thanks!
For more information please contact us!
